Which counter weight bar is correct?

Harmonic Geared Mount
Post Reply
Zara415
Posts: 3
Joined: Fri Mar 17, 2023 11:24 pm

Which counter weight bar is correct?

Post by Zara415 »

Apologizes if this has been asked and answered; I searched and could not find anything on this here.

There seems to be conflicting information on the counter weight bar one would need to use with the NYX-101.

In the User Manual it states - "M12 x 1.25mm"
In the FAQ section it states - "M12 x 1.75mm"

Which one is right? I'm assuming it is actually the 1.75mm pitch thread as I can't seem to find anyone that offers or mounts that use a 1.25mm thread pitch at M12.

Can I get some clarification and you might also want to possibly correct whichever one of those is wrong as it's proven to be quite confusing.
rloftin
Posts: 5
Joined: Sat Feb 11, 2023 1:39 am

Re: Which counter weight bar is correct?

Post by rloftin »

ZWO Counter Balance Bar for AM5 Mount # BC230

Got this one and it fits perfectly also got an iOptron counterweight

3006-10 4.5kg CW for 26/27/28, AZ mount Pro and others

also see in this forum last reply
Fully loaded 11" too much, backslides often
rick123
Posts: 3
Joined: Wed Nov 03, 2021 9:23 pm

Re: Which counter weight bar is correct?

Post by rick123 »

I had the same issue here has the OP so I asked Pegasus support. They came right back and stated that the manual had a typo and it is a M12 x 1.75 pitch. The ZWO AM5 bar does work, and I was able to use Celestron AVX counterweights. The plastic M12 cap screw works fine as a toe saver at the end of the bar.

I hope this helps.

Rick
Post Reply