Mounting the usb hub

[swilleter]

Having just acquired the Pegasus 3.1 USB 6 port hub I'm wondering how members have mounted this on their equipment. I'm also looking a acquiring the Pegasus Pocket Powerbox Micro in the near future.

Many thanks

[Bryan]

I mounted my USB Control Hub on a PowerBox Advanced, using Pegasus brackets. Scroll to the bottom of https://pegasusastro.com/products/pocke ... x-advance/

You can power the hub from one of the Advanced power outputs (4 12 VDC, 1 adjustable VDC) with a DIY, very short cable.

I wish I could DIY USB cables for the same reason!

Bryan

[Evans]

Currenty, the shortest cable we provide is half a meter. For this purpose it will require a very short cable. Maybe 10cm

[Bryan]

L-Com has a wide variety of USB cables in standards lengths of 0.3 m, 0.5, 0.75, 2, 3, and 5m. The standard lengths are reasonable cost. Custom lengths are also available.

https://www.l-com.com/search?Level0=USB ... _type=grid

The filter engine gets lost at times, but the products are robust.

Bryan

[mytyme]

I just received my USB Hub Control today. In order to mount it to the Power Box Advance top plate (PEG-TOPPLATE-PPBA) using the center hole I needed a 5mm x 6mm or 7mm long screw. The threads in the Hub only extend about 2mm into the case. I found the screw I needed at my local Ace Hardware store.

-gary-