Can't Connect Falcon Rotator to NINA
Posted: Thu Feb 02, 2023 10:18 pm
I'm new at using both NINA and Pegasus products ,only now getting around to setting up a new system having previously been an ASIAIR User. I am using the Ultimate Powerbox V2 as a NINA switch using the native drivers. I also have a Flatmaster connected to the powerbox, which I can start and operate in NINA. I am operating the latest Unity build and all items are updated. I am using NINA build 2.1.0.9001.
I can connect the powerbox and the flatmaster to NINA, plus a moonlite focuser controlled via the motor controller in the powerbox. However, when I try to connect the falcon, NINA states that there is an ASCOM driver error, cannot connect to the falcon rotator and please select a device.
I am not running unity at the same time as googling stated there was a conflict problem (which solved all my other connection problems), but the rotator is still outstanding.
I also tried direct connection to the mini pc I'm using, but still no joy. It works fine when using Unity to control it.
Any thoughts on what I can do to resolve the issue and connect the rotator to NINA?
Thanks from a Newbie Poster.
I can connect the powerbox and the flatmaster to NINA, plus a moonlite focuser controlled via the motor controller in the powerbox. However, when I try to connect the falcon, NINA states that there is an ASCOM driver error, cannot connect to the falcon rotator and please select a device.
I am not running unity at the same time as googling stated there was a conflict problem (which solved all my other connection problems), but the rotator is still outstanding.
I also tried direct connection to the mini pc I'm using, but still no joy. It works fine when using Unity to control it.
Any thoughts on what I can do to resolve the issue and connect the rotator to NINA?
Thanks from a Newbie Poster.