I know the Falcon takes 12 VDC but how sensitive is it to sharing power with my FocusCube2 or ASI2600MC Pro? I want to use a 'Y' connector to supply power. I use ferrite beads on all my 12 VDC power lines going to my equipment to filter high frequency noise.
Jim
Phoenix, AZ USA
Power Requirements
-
- Posts: 19
- Joined: Sat Jan 30, 2021 2:56 am
Re: Power Requirements
The ferrite is not required. The v-split is just fine. The rotator consumes less than 0.5Amps