Page 1 of 1

zwo 2600 camera will not power up

Posted: Wed Nov 23, 2022 12:02 am
by BobPeck
I recently aquired the Pegasus Astro Ultimate Powerbox v2.
The zwo 2600 camera will not consistently power up. I have tried all the power ports including the always on port.
Interesting when I disconnect the MeLE Fanless Mini PC Quieter3 computer, the camera will sometimes power up. I am using a 30 amp PSU with 12 Gauge cable.
I am using the supplied pegasus power cable.
Thank you for your response

Re: zwo 2600 camera will not power up

Posted: Thu Nov 24, 2022 8:21 pm
by pleiades
BobPeck wrote: Wed Nov 23, 2022 12:02 am I recently aquired the Pegasus Astro Ultimate Powerbox v2.
The zwo 2600 camera will not consistently power up. I have tried all the power ports including the always on port.
Interesting when I disconnect the MeLE Fanless Mini PC Quieter3 computer, the camera will sometimes power up. I am using a 30 amp PSU with 12 Gauge cable.
I am using the supplied pegasus power cable.
Thank you for your response
I'm using a Quieter2q computer with ZWO 6200 without problem. As a test, have you try connecting your ZWO 2600 directly to your PSU?

Re: zwo 2600 camera will not power up

Posted: Mon Nov 28, 2022 9:32 pm
by BobPeck
yes I have. Camera powers up
Bob

Re: zwo 2600 camera will not power up

Posted: Tue Nov 29, 2022 7:05 pm
by pleiades
To which port your Quieter3 is normally connected?

Are you using Windows or Linux ?

Regards,
Yves