Dimming Flatmaster 150 in boost mode.
Posted: Mon Aug 15, 2022 10:32 pm
Hi, I'm using one of the new LED Flatmaster 150s with my ZWO 2600mm pro. When I try to create flats using SGP using the default settings, I get banding, particularly with the LUM filter. I've tried switching into Boost mode as the tool tip suggests and this does seem to take care of the banding, but now the panel seems too bright. With my LUM filter I need to lower the brightness to 1 and this seems to be introducing some other linear artifacts. I'm running this thru an advance power box and using a Pegasus 12v power supply. Any ideas what to try next? I'm not having any problem with my narrowband flats.