FocusCube temperature compensation
FocusCube temperature compensation
Please excuse my ignorance but I can find no information of the temperature compensation feature. Is it automatic or do I have to adjust focus when the temperature varies a specific amount? How does the temperature compensation section work? Is there any download information on how to use all the specific settings for the program? I have downloaded the FocusCube manual but this gives very little info on the how to really use the settings.
Re: FocusCube temperature compensation
hi, this is not an answer to the previous comment but just a wish for a similar understanding with the Pegasus Electronic focuser Universal Kit (running through a Pegasus UPBv2). I use NINA for my sequencing application and have the Electronic Focuser hooked in NINA but the temp compensation is inactive even though i have an Environmental Sensor attached to the UPBv2.
? - would i be right to think the Pegasus Electronic focuser kit does not have the capability to Temp compensate. many thanks ... gary
? - would i be right to think the Pegasus Electronic focuser kit does not have the capability to Temp compensate. many thanks ... gary
Re: FocusCube temperature compensation
Unfortunatelly temp compensation is not supported in ASCOM driver.
As most people use the V-curve model the temp compensation way is a little bit "old aged" way to focus. It definitely does not ensure that your focus point will be accurate.
Although, we have it on the list to support in in ASCOM driver soon.
By the way this screenshot is for the Ultimate Powerbox v2 and not for the FocusCube.
FocusCube supports in standalone software the temp compensation functionality
As most people use the V-curve model the temp compensation way is a little bit "old aged" way to focus. It definitely does not ensure that your focus point will be accurate.
Although, we have it on the list to support in in ASCOM driver soon.
By the way this screenshot is for the Ultimate Powerbox v2 and not for the FocusCube.
FocusCube supports in standalone software the temp compensation functionality
-
- Posts: 3
- Joined: Thu Apr 15, 2021 9:43 pm
Re: FocusCube temperature compensation
Any updates on this support in the ASCOM driver? While I can refocus every degree drop, it's time consuming, and doesn't keep all frames in focus. One nice thing about temp compensation is it gradually keeps the focus as temperatures drop without the need to refocus.
Re: FocusCube temperature compensation
Unfortunately it is not supported yet in ASCOM driver.
As you use NINA why don't you follow the v-curve model.
The temp compensasion model is not very reliable.
V-Curbe provides a visual proof analysis that the telescope is focused.
As you use NINA why don't you follow the v-curve model.
The temp compensasion model is not very reliable.
V-Curbe provides a visual proof analysis that the telescope is focused.
-
- Posts: 3
- Joined: Thu Apr 15, 2021 9:43 pm
Re: FocusCube temperature compensation
I have been using it, but here's what tends to happen. Focus starts to drift worse until a refocus triggers with a % temp change or % FWHM change. Temps drop really fast here in Texas once it gets dark. This fast change means refocusing a lot.
So temp compensation would eliminate these spikes you see in the graph where FWHM creeps up until a refocus is triggered. This wastes time and frames that might otherwise be good with temperature compensated focus. But even with temp compensated focus, a refocus can still happen at filter change or % fwhm change if necessary. It should just happen a lot less often.
So temp compensation would eliminate these spikes you see in the graph where FWHM creeps up until a refocus is triggered. This wastes time and frames that might otherwise be good with temperature compensated focus. But even with temp compensated focus, a refocus can still happen at filter change or % fwhm change if necessary. It should just happen a lot less often.
-
- Posts: 13
- Joined: Mon Jun 27, 2022 9:20 am
-
- Posts: 13
- Joined: Mon Jun 27, 2022 9:20 am
Re: FocusCube temperature compensation
Can you please answer my previous question: do you still have it on your roadmap and if yes, when is the plan to integrate that feature? Thanks, Rainer
Re: FocusCube temperature compensation
It is going to be available by the next Unity release. End of August or early September of 2022
-
- Posts: 13
- Joined: Mon Jun 27, 2022 9:20 am
Re: FocusCube temperature compensation
Awesome, thank you!