PPBA will not power the Adj Out port
Posted: Sat Jun 26, 2021 2:28 pm
Greetings,
Sadly, I have to say that I am having one specific issue with my PPBA. So far, everything works fine except for the Adj Out port. I received my unit a few weeks ago and had no problem so far, except last night when I was trying to power my Canon DSLR. I have set the port ON and at 8v. I also set All Outputs ON in the config tab but it was not receiving power. I have attached an image of my settings.
I am using a 110/220 AC to 12v 10amp DC output. I have also tried to power other gear in my rig such as the focuser by switching the AdjOut port to 12v but no power supply either. I have also tried to use a field battery providing 13,5v but nothing. Everything else works flawlessly but for some reason, the AdjOut is not. There is no warning on the software on my windows laptop and neither on my Raspberry pi.
Any help is appreciated.
Thanks
Guy
Sadly, I have to say that I am having one specific issue with my PPBA. So far, everything works fine except for the Adj Out port. I received my unit a few weeks ago and had no problem so far, except last night when I was trying to power my Canon DSLR. I have set the port ON and at 8v. I also set All Outputs ON in the config tab but it was not receiving power. I have attached an image of my settings.
I am using a 110/220 AC to 12v 10amp DC output. I have also tried to power other gear in my rig such as the focuser by switching the AdjOut port to 12v but no power supply either. I have also tried to use a field battery providing 13,5v but nothing. Everything else works flawlessly but for some reason, the AdjOut is not. There is no warning on the software on my windows laptop and neither on my Raspberry pi.
Any help is appreciated.
Thanks
Guy