Dew Control
Posted: Sun May 30, 2021 10:01 pm
I am trying to setup dew control on my Powerbox micro for an Edge HD 9.25. I am using an ASIAir pro via my mobile so don't wish to connect the Powerbox to a laptop.
1. Where should I place the dewpoint detector. Currently I sit it on top of the powerbox micro?
2. In auto dew mode, my corrector seems to dew up before the heater strap begins to work and the generated heat does not seem to completely clear the corrector.
3. What I would like to do is to setup the powerbox so the dew heater power comes on at around %80 percent whenever I plug in the dew heater. However if I set Autodew off and the power output to around 200 (80%) it wont turn on unless the powerbox is connected to my laptop. Alternatively if I set autodew on then I cant set the power output to 80% as it resets to zero once the powerbox reads the dewpoint detector. and my corrector dews up before the power comes on.
What can I do?
1. Where should I place the dewpoint detector. Currently I sit it on top of the powerbox micro?
2. In auto dew mode, my corrector seems to dew up before the heater strap begins to work and the generated heat does not seem to completely clear the corrector.
3. What I would like to do is to setup the powerbox so the dew heater power comes on at around %80 percent whenever I plug in the dew heater. However if I set Autodew off and the power output to around 200 (80%) it wont turn on unless the powerbox is connected to my laptop. Alternatively if I set autodew on then I cant set the power output to 80% as it resets to zero once the powerbox reads the dewpoint detector. and my corrector dews up before the power comes on.
What can I do?