The INDI device manager in EKOS shows that it is connected but when I use either the focus module in EKOS or the Absolute Position setting in the device manager I get no movement of the focuser and errors in the INDI driver logs.
The logs record the following errors, which repeat until I disconnect the FocusCube3 and reconnect it. Note, EKOS displays logs most recent entry first so the Serial error occurs first followed by the Error on... error.
Code: Select all
2024-05-11T09:50:01: [ERROR] Error on [Cmd=FA Res=]
2024-05-11T09:50:01: [ERROR] Serial error: Write Error: Input/output error
I connected to the StellarMate via ssh and checked the permissions on the port configured for the FocusCube3 in INDI and they appear to be correct. So, I don't believe this is a permissions issue. The code below shows the device permissions and that the stellarmate user is in the dialout group which has read and write (RW) permission on the port. It also includes info about the StellarMateOS host and versions.
Code: Select all
root@stellarmate:~# l /dev/serial/by-id/*PegasusAstro*
lrwxrwxrwx 1 root root 13 May 11 05:49 /dev/serial/by-id/usb-PegasusAstro_FocusCube3_70:04:1d:f9:e7:70-if00 -> ../../ttyACM3
root@stellarmate:~# l /dev/ttyACM3
crw-rw---- 1 root dialout 166, 3 May 11 06:56 /dev/ttyACM3
root@stellarmate:~# groups stellarmate
stellarmate : stellarmate adm dialout cdrom sudo audio video plugdev games users input render netdev spi i2c gpio lpadmin
root@stellarmate:~# uname -a
Linux stellarmate 6.6.28+rpt-rpi-2712 #1 SMP PREEMPT Debian 1:6.6.28-1+rpt1 (2024-04-22) aarch64 GNU/Linux
Thanks!