I have been suffering "backlash" first noticed with PHD2 post calibration that is when you look at the calibration review graph and the results are either side of the predicted line
YET when you use guiding assistant and have it measure the backlash you get a nice match ( although not perfect) between measured and ideal . any pointers ?? I'm in touch with Pegasus support but posting here in case it's been seen before.
I'm in the process of locking down the hardware for any flex in the kit
I have the NYX101 , with a small 80mm refractor . using Sequence generator pro and PHD2 latest dev release.
https://drive.google.com/drive/folders/ ... sp=sharing
Regards