Focus Cube V2.0 Step Size

[m32guy]

Hi,

Several months back I swapped out an older Focus Cube v2 with a new one. I've noticed with the new Focus cube that it takes half as many steps to reach focus compared to the old one in NINA. So instead of 2 microns per step I'm probably moving closer to 4 microns. Did something change in the firmware in the last couple of years? Or is there a software/ASCOM setting that needs tweaking. This isn't a show stopper but I do want to make sure I've got everything configured correctly.

Thanks,

--Steve

[Evans]

We have switched our firmware from half step to full step drive as the resolution is very high and there is no need to use half step with this specific device.

[m32guy]

Thanks. Just wanted to make sure I hadn't misconfigured things.