Brand new to powerbox ,been trying to set it up today ,all seemed good until i tried to take a test shot with my new zwo 533mc pro camera and i get error messages like in the attached picture .this does not happen if i plug the camera into a usb 2.0 slot why is this ,do i have a lemon or am i missing something .
just to add i tried 2 different zwo leads and another make .also the camera works fine into usb 3.0 hub or into my laptop just not the £260 powerbox well £320 if you add the power supply you have to buy as they no longer include the cigarette lighter type plug anymore as i found out when it arrived ..shame no one tells you these things when you order them !!
latest drivers and software and latest build of NINA.
powerbox advance usb 3.0 issues
-
- Posts: 3
- Joined: Wed Oct 26, 2022 11:11 pm
Re: powerbox advance usb 3.0 issues
This has to do with ZWO and USB bandwidth limit setting with ZWO hardware/ZWO driver.
E.g: https://forum.sequencegeneratorpro.com/ ... eras/16454
Please address to ZWO for this issue
E.g: https://forum.sequencegeneratorpro.com/ ... eras/16454
Please address to ZWO for this issue
-
- Posts: 3
- Joined: Wed Oct 26, 2022 11:11 pm
Re: powerbox advance usb 3.0 issues
Ok so I sorted it thanks to the cloudy nights forum.it had nothing to do with bandwith it was a clash between the 2 ZWO cameras in PHD2 ..Evans wrote: ↑Mon Oct 31, 2022 9:28 am This has to do with ZWO and USB bandwidth limit setting with ZWO hardware/ZWO driver.
E.g: https://forum.sequencegeneratorpro.com/ ... eras/16454
Please address to ZWO for this issue