PPBAv2 not connecting

Post Reply
dennisc
Posts: 2
Joined: Wed Jul 27, 2022 1:59 am

PPBAv2 not connecting

Post by dennisc »

When using my PPBAv2, my computer can't "see" it using the PPBA software or the Unity Platform. My devices connected to its power out ports can be seen. Unplugging and plugging in my devices into the USB3 ports /occasionally/ works for the devices but it's very hit or miss and doesn't work more than it does. I've yet to be able to get all four devices to be seen by my computer at once. My devices are an iOptron CEM60 mount, ASI2600, ASI174, and FocusCubev2.

I get a lot of "port doesn't exist" type errors. I suspect there's some sort of port conflict issue going on, but I can't seem to sort it out. Any help?
dennisc
Posts: 2
Joined: Wed Jul 27, 2022 1:59 am

Re: PPBAv2 not connecting

Post by dennisc »

So, I got fed up w/ the problem and just completely wiped my computer and re-installed windows and now it works swimmingly. Probably had some port conflicts that I couldn't shake and the PPBA was one too many things and caused my house of cards to come tumbling down.

On the plus side, clean install of windows feels pretty good.
Post Reply