Page 1 of 1
Mounting screws
Posted: Tue Apr 27, 2021 10:23 pm
by nemesis2a
Hi!
Just purchased the pocket powerbox micro. Can someone tell me the screw size for mounting the powerbox?
Thanks!
Re: Mounting screws
Posted: Tue Apr 27, 2021 10:43 pm
by Evans
It is M3. (metric)
Re: Mounting screws
Posted: Tue May 04, 2021 3:49 pm
by nemesis2a
Thanks for the reply Evans!
Re: Mounting screws
Posted: Tue Mar 14, 2023 8:30 pm
by danielscott
Congrats on your new purchase of the pocket powerbox micro! I hope it works great for you.
Re: Mounting screws
Posted: Tue Mar 14, 2023 8:58 pm
by abitruchriste
As for the screw size for mounting the power box, I unfortunately don't have that information on hand. But the Internet says that the length of the screw is about 12.5 mm or 14.8 mm (2 options) Diameter of the screw is about 3.3 mm Cap diameter is about 7 mm Thread SCREW 6 32 (inch thread). You might want to check out
https://www.scrooz.com.au/their website and see if they have the screw size you need. This is Australia's online fastener suppliers and have a range of screws and other fasteners available.