Prism rotation

Scops Motorised Off Axis Guider
Post Reply
rick123
Posts: 2
Joined: Wed Nov 03, 2021 9:23 pm

Prism rotation

Post by rick123 »

I am putting together a new imaging system and have the SCOPS OAG and the Falcon rotator. I put them together per your instructions but have found that the prism is now facing the wrong direction for my purposes.

Is the prism direction changeable? I do not want to mess with this unless I have instructions.

Also with the two units connected the set rings/jam nuts do not have enough clearance to actually thread on the camera stalk. Is that normal? My guide camera fits on just fine but without a way to "fix" its position is is free to rotate - which is not good.

Thanks.
Post Reply