Motor Speed max

FocusCube v1 & v2, Zero, Motor Focus Kit (Universal or Zero)
Post Reply
Vincent
Posts: 2
Joined: Fri Dec 31, 2021 1:10 pm

Motor Speed max

Post by Vincent »

Hello,
I have a focus cube V2 that a use with a Celestron C9.
I use differents configurations with this telescope (hyperstar, reducer, ...) and it need to change the focus : for exemple, hyperstar is with the focus of 529000 and the reducer is with the focus of 190000.
When I change the configuration, it's very long because the motor speed is very slow.

The motor speed is the default : 400.
When I tried to increase this value, after 600, the motor is skating even if remove the belt.

I would like to know if it's normal or if there is a problem with my motor.

Thank you
User avatar
Evans
Site Admin
Posts: 504
Joined: Wed Dec 02, 2020 3:06 pm
Contact:

Re: Motor Speed max

Post by Evans »

This is fine. The motor cannot support speeds higher than 450-500 steps/sec
Vincent
Posts: 2
Joined: Fri Dec 31, 2021 1:10 pm

Re: Motor Speed max

Post by Vincent »

OK, thank you for our response
Post Reply