Good evening,
I need a power cable to connect a FLI Microline camera. Is there already an appropriately assembled cable for the power box here ?
Many greetings
Björn
FLI CCD with PuPBv2
Re: FLI CCD with PuPBv2
Currently we do not provide an FLI cable.
Pinout seems to be easy but we do not have it yet.
Please check if FLI can provice a 2.1mm to FLI plug converter cable.
Pinout seems to be easy but we do not have it yet.
Please check if FLI can provice a 2.1mm to FLI plug converter cable.
Re: FLI CCD with PuPBv2
I’m in the same boat. Did you ever find a solution and does it work without creating noise in the image?
Barry
Barry
Re: FLI CCD with PuPBv2
This is what you need. a 2.1mm -> Kycon Kppx-4P connector
https://mouser.com/ProductDetail/MEAN-W ... 5rhQ%3D%3D
https://mouser.com/ProductDetail/MEAN-W ... 5rhQ%3D%3D
Re: FLI CCD with PuPBv2
Thanks for your reply. Unfortunately that pinout doesn't line up with the FLI +/- pins. Please see page 19: https://www.flicamera.com/pdf/MicroLine_RevI.pdf
Here is the pinout for the one you just linked me to: https://www.meanwell.com/webapp/product ... UG-P1J-R7B
They are not the same.
Are you able to manufacture one for me with the proper pinout?
Regards,
Barry
Here is the pinout for the one you just linked me to: https://www.meanwell.com/webapp/product ... UG-P1J-R7B
They are not the same.
Are you able to manufacture one for me with the proper pinout?
Regards,
Barry
Re: FLI CCD with PuPBv2
I think I have found the correct cable for the FLI. Here is the spec sheet showing the proper pin out. https://tsi.tyconsystems.com/doc/UserMa ... ni_DIN.pdf
Here is the website to order https://tsi.tyconsystems.com/doc/UserMa ... ni_DIN.pdf
Also available on Amazon.
I’ll test and report back.
Here is the website to order https://tsi.tyconsystems.com/doc/UserMa ... ni_DIN.pdf
Also available on Amazon.
I’ll test and report back.