FLI CCD with PuPBv2

Ultimate Powerbox v1 and v2
Post Reply
Bjoern
Posts: 5
Joined: Mon Feb 01, 2021 11:12 pm

FLI CCD with PuPBv2

Post by Bjoern »

Good evening,

I need a power cable to connect a FLI Microline camera. Is there already an appropriately assembled cable for the power box here ?

Many greetings
Björn
User avatar
Evans
Site Admin
Posts: 504
Joined: Wed Dec 02, 2020 3:06 pm
Contact:

Re: FLI CCD with PuPBv2

Post by Evans »

Currently we do not provide an FLI cable.
Pinout seems to be easy but we do not have it yet.
Please check if FLI can provice a 2.1mm to FLI plug converter cable.
BarryS
Posts: 6
Joined: Sun Aug 28, 2022 10:27 pm

Re: FLI CCD with PuPBv2

Post by BarryS »

I’m in the same boat. Did you ever find a solution and does it work without creating noise in the image?

Barry
User avatar
Evans
Site Admin
Posts: 504
Joined: Wed Dec 02, 2020 3:06 pm
Contact:

Re: FLI CCD with PuPBv2

Post by Evans »

This is what you need. a 2.1mm -> Kycon Kppx-4P connector
https://mouser.com/ProductDetail/MEAN-W ... 5rhQ%3D%3D
BarryS
Posts: 6
Joined: Sun Aug 28, 2022 10:27 pm

Re: FLI CCD with PuPBv2

Post by BarryS »

Thanks for your reply. Unfortunately that pinout doesn't line up with the FLI +/- pins. Please see page 19: https://www.flicamera.com/pdf/MicroLine_RevI.pdf

Here is the pinout for the one you just linked me to: https://www.meanwell.com/webapp/product ... UG-P1J-R7B

They are not the same.

Are you able to manufacture one for me with the proper pinout?

Regards,
Barry
BarryS
Posts: 6
Joined: Sun Aug 28, 2022 10:27 pm

Re: FLI CCD with PuPBv2

Post by BarryS »

I think I have found the correct cable for the FLI. Here is the spec sheet showing the proper pin out. https://tsi.tyconsystems.com/doc/UserMa ... ni_DIN.pdf

Here is the website to order https://tsi.tyconsystems.com/doc/UserMa ... ni_DIN.pdf

Also available on Amazon.

I’ll test and report back.
Post Reply