What is the ASCOM version you have? Please try installing the latest ASCOM first

You have to click the arrow at the bottom right to expand the window for the derotation calculation functionality

Multiple customers. Works perfectly fine with Stellarmate

It seems that that page of the link was changed.
Fixed, on our website
Correct link is: https://rti-zone.org/software_x2focuser ... hp#pegasus

It is definiteny not damaged and it has to do with OSX and any software you use.

Yes, the rotator does not fix any periodic error.

Yes, I have similar reports about this Planeware unit.
Probably a large capacitor inside Planewave's unit draws lots of current on startup and triggers the UPBv2 current protection.
You can ignore it for now

The firmware has nothing to do with the USB connecivity and how the USB Hub works.

Memory leak has been fully fixed in upcoming version 1.4.7. Memory should be less than 50Mb by the end of night.

A shortwire / overcurrent detected and controller disabled the port. Which device do you have there? (what is the delta-T?)

I'm afraid this is not possible with current firmware.
It is advised to use auto-dew and let the sensor do the rest.

I noted your request as a feature request for future firmware releases.

Sure, I noted this feature request for the upcoming software release.

Each rotator has a unique id and spawn a different com port. Although, it requires some development work in standalone application to let you select each rotator

I do not think there a stable/complete XMC driver yet. Although, there is active development work for the XMC driver.
Indi driver is written by Indi community.

The SCT feathertouch is not required and has to be removed The FocusCube (SCT version) requires the stock focuser

It depends of which driver you install.
The USB drvers are only for the discovery of the device.
Each ASCOM driver (in our website) has a unique installation setup.

FocusCube motor is way more accurate and precise.. and vibration free

Please contact support@pegasusastro.com for further investigation.
A teamviewer session might help to troubleshoot further
If the current meter has a problem you can send the unit back to us for inspection.

Both (aggresiveness and auto-dew) is stored in memory and ALWAYS retrieved on boot of both devices (PPB Advance and Micro).

Indeed, it is related as it reads and converts a wrong value as it believes that it is connected to another model.
Can you try with another computer? We need to see if this is a framework issue in Windows.

Idle current draw is less than 0.06Amps.
Can you please send me a photo of what you see?
Either the current meter is off and requires recalibration or something leaks (well.. consumes) power.