Thanks for that info.
Cheers
Search found 25 matches
- Wed Feb 14, 2024 11:29 pm
- Forum: NYX-101 Harmonic Geared Mount
- Topic: Rotate the declination axis - how?
- Replies: 5
- Views: 2219
- Mon Aug 07, 2023 6:28 am
- Forum: NYX-101 Harmonic Geared Mount
- Topic: Unable to connect via mount WiFi
- Replies: 4
- Views: 2521
Re: Unable to connect via mount WiFi
As far as I know, - Mount must be connected by USB to Laptop. - Mount must be connected to internet over its internal WiFi. - Run Unity on Laptop to kick off firmware update. - Mount MUST download and install update directly from internet over WiFi. I have updated mount firmware several times as des...
- Sat Jul 15, 2023 10:52 am
- Forum: NYX-101 Harmonic Geared Mount
- Topic: Firmware update via Unity under WIN11 fails
- Replies: 8
- Views: 3960
Re: Firmware update via Unity under WIN11 fails
I also just had success with the latest mount firmware update using my Windows 11 Laptop, after cleaning up the windows firewall as suggested by Evans.
Thanks for the help.
Cheers
Thanks for the help.
Cheers
- Wed Jun 28, 2023 1:27 pm
- Forum: NYX-101 Harmonic Geared Mount
- Topic: Guiding tips
- Replies: 2
- Views: 4002
Re: Guiding tips
Thanks for the info and taking the time to post it.
Cheers
Cheers
- Tue May 23, 2023 12:17 pm
- Forum: NYX-101 Harmonic Geared Mount
- Topic: Firmware update via Unity under WIN11 fails
- Replies: 8
- Views: 3960
Re: Firmware update via Unity under WIN11 fails
Thanks Evans,
I also had two entries in the Firewall settings, one Public and one Private.
I deleted them both then recreated s single setting with both Private and Public enabled.
I will try it out at the next upgrade, same as ChrisHD.
Cheers
I also had two entries in the Firewall settings, one Public and one Private.
I deleted them both then recreated s single setting with both Private and Public enabled.
I will try it out at the next upgrade, same as ChrisHD.
Cheers
- Mon May 22, 2023 6:24 pm
- Forum: NYX-101 Harmonic Geared Mount
- Topic: Better initial alignment tips
- Replies: 2
- Views: 1412
Re: Better initial alignment tips
Thanks for the info.
Cheers
Cheers
- Mon May 01, 2023 10:00 pm
- Forum: NYX-101 Harmonic Geared Mount
- Topic: Firmware update via Unity under WIN11 fails
- Replies: 8
- Views: 3960
Re: Firmware update via Unity under WIN11 fails
[Why does a Firmware upgrade work under WIN 10 but not under WIN11 if everything else is the same?] I have the same problem and I don't have any real idea why. [By writing this I recognize that there is a difference! My WIN10 Notebook is connected to my home network via cable! I missed that when I’m...
- Sat Apr 29, 2023 10:23 pm
- Forum: NYX-101 Harmonic Geared Mount
- Topic: Firmware update via Unity under WIN11 fails
- Replies: 8
- Views: 3960
- Sat Apr 22, 2023 10:02 am
- Forum: NYX-101 Harmonic Geared Mount
- Topic: USing the Nyx with a battery power source
- Replies: 3
- Views: 1386
Re: USing the Nyx with a battery power source
Hi Mike, This may not be too helpful but is all I have. I use a 12V battery (LiFePO4, 12.8 V 36 Ah by Miady) feeding my Nyx 101 directly. Another 12V feed goes directly to a Pegasus USB Control Hub which feeds & talks to the Guide Camera; talks to local Laptop, camera (self powered Nikon Z6ii) a...
- Fri Apr 14, 2023 10:12 am
- Forum: NYX-101 Harmonic Geared Mount
- Topic: User Experiences
- Replies: 2
- Views: 931
Re: User Experiences
I can't answer most of your questions as my rig is much lighter. My tests so far have been with my travel 80mm / 480mm Triplet refractor, payload total 4.5kg. It has all gone well. Guided at 2sec in PHD2. My main scope is a 125mm / 740mm APO, total payload 10.5kg. Will be used next time we get clear...
- Fri Mar 17, 2023 4:03 pm
- Forum: NYX-101 Harmonic Geared Mount
- Topic: Nyx-101 Firmware version?
- Replies: 5
- Views: 2443
Re: Nyx-101 Firmware version?
Hi, I am having problems updating the Firmware. Currently on 1.17 Rev A and trying to get to 1.19. Using Unity on my PC, Release: 1.8.1733.15. On my PC, connected over USB, Unity shows that a Firmware Update is available and I can select the icon. When I try to run the Upgrade in the Unity Firmware ...
- Fri Mar 03, 2023 1:19 pm
- Forum: NYX-101 Harmonic Geared Mount
- Topic: Need some guidance
- Replies: 15
- Views: 2925
Re: Need some guidance
Hi Kathie, Thanks for the update. You are very welcome. I did read all about the ZWO blocking Pegasus issue on CN. I don't use my ASI Air anymore as I had to buy ZWO cameras to continue with it. So this problem didn't affect me. For control, I tried my StellarMate on a Raspberry Pi 4 but got tangled...
- Wed Mar 01, 2023 10:30 am
- Forum: NYX-101 Harmonic Geared Mount
- Topic: First severe problem
- Replies: 5
- Views: 3520
Re: First severe problem
Bravo !!
That is a relief
I am making a note of Carles info - very helpful, thanks.
Cheers
Tim
That is a relief
I am making a note of Carles info - very helpful, thanks.
Cheers
Tim
- Sun Feb 26, 2023 10:37 pm
- Forum: NYX-101 Harmonic Geared Mount
- Topic: First severe problem
- Replies: 5
- Views: 3520
Re: First severe problem
This is an uninformed wild guess, but - maybe a belt came off with the abrupt cutting of the power ?
In this way the motor can run, with sound, but no movement of the axis.
Good luck in any case.
In this way the motor can run, with sound, but no movement of the axis.
Good luck in any case.
- Sat Feb 25, 2023 9:11 am
- Forum: NYX-101 Harmonic Geared Mount
- Topic: NYX-101 and EKOS/IndiLib
- Replies: 3
- Views: 1127
Re: NYX-101 and EKOS/IndiLib
Thanks for the update and the wishes.
I will have a go with the Astroberry distribution one day. I haven't given up with StellarMate, but I want to spend my time on imaging at the moment
The Nyx 101 is very well designed.
Cheers
Tim
I will have a go with the Astroberry distribution one day. I haven't given up with StellarMate, but I want to spend my time on imaging at the moment
The Nyx 101 is very well designed.
Cheers
Tim
- Fri Feb 24, 2023 12:29 pm
- Forum: NYX-101 Harmonic Geared Mount
- Topic: NYX-101 and EKOS/IndiLib
- Replies: 3
- Views: 1127
Re: NYX-101 and EKOS/IndiLib
Hi, I have tried setting up StellarMate on RPi 4, 4GB. I bought these to control this mount. Generally OK, but I did have three issues. I am inexperienced in StellarMate / INDI / ekos, so could easily be just that. I was using VNC from a windows Laptop as my terminal, all that worked fine. 1. Initia...
- Mon Feb 20, 2023 8:54 pm
- Forum: NYX-101 Harmonic Geared Mount
- Topic: Problems creating a local network for managing the mount
- Replies: 4
- Views: 1429
Re: Problems creating a local network for managing the mount
Great. Thanks a lot. I will look into that.
Cheers
Tim
Cheers
Tim
- Mon Feb 20, 2023 8:17 am
- Forum: NYX-101 Harmonic Geared Mount
- Topic: Problems creating a local network for managing the mount
- Replies: 4
- Views: 1429
Re: Problems creating a local network for managing the mount
Thanks for your post. It has saved me a lot of messing about. I was planning a similar approach to your original one. i.e. Mount side Surface Go as the local controller on NINA with remote access from Dell Laptop in the warm, all using the Nyx 101 as the WiFi Access Point. In my case I have the Nyx ...
- Sat Feb 18, 2023 10:15 am
- Forum: NYX-101 Harmonic Geared Mount
- Topic: Need some guidance
- Replies: 15
- Views: 2925
Re: Need some guidance
You are very welcome.
All good news.
Cheers
Tim
All good news.
Cheers
Tim
- Fri Feb 17, 2023 10:43 pm
- Forum: NYX-101 Harmonic Geared Mount
- Topic: Need some guidance
- Replies: 15
- Views: 2925
Re: Need some guidance
Hi, << So I need a cable with the GX12 connector on one end and the small connector to plug into my power tank>> Heve a look at this thread on Cloudy Nights where this cable is identified. https://www.cloudynights.com/topic/818409-pegasus-astro-nyx-101-harmonic-mount/page-36 Post 884 by Andy Lucy. L...